SOLVED Fix BUGCODE_NDIS_DRIVER Error in Windows 10 – 5 Solutions

BUGCODE NDIS driver windows 10 fix, You may have come across a computer error where the operating system crashes and displays a Blue Screen of Death and an error. This would be classified as a BUGCODE_NDIS_DRIVER error (BSOD).

Most of the time, it comes during Windows 10 installation when the Wi-Fi option is enabled in the BIOS.

BUGCODE NDIS driver windows 10 fix, You may see a few different results like a computer restart due to this error code being displayed.

The BUGCODE_NDIS_DRIVER error can be caused by faulty driver updates. The error code has been known to have been triggered when it comes to network drivers.

During installation, if Wi-Fi LAN is enabled in your BIOS you may notice that the issue still exists.

At this point it’s important for you to disable all the wireless options in your BIOS so the computer doesn’t attempt to connect intermittently which will trip up Windows Updates and cause a whole host of other issues that are far more severe than just installing some drivers.

Multi-core processors can be a problem. BUGCODE NDIS driver windows 10 fix While you may experience slow performance on Windows computers, you could disable the Wi-Fi adapter options and do a clean install of your software.

If possible, you can re-enable your CPU cores and update your Wi-Fi drivers. reddit-BUGCODE-NDIS-DRIVER-error-report 1

Downloading drivers from the Intel website is a way of making sure that the driver you are using is the latest and most up-to-date version. This can make a difference in terms of performance and reliability.

After installation take a few moments restore your Wi-Fi skills that were put on the backburner.

For many laptops, Wi-Fi network driver is very important . This is because , unlike desktop PCs which have wired connections.

Many times, BUGCODE NDIS driver windows 10 fix you may encounter Windows 10 issues on your ACER computer.

The errors have to do with the drivers and firmware – the source of the error is due to poor installation or incompatible drivers that didn’t get properly installed on the motherboards within your ACER desktop computers.

But with the recent Windows 10 20H1 (also known as 2004 update) edition, it’s more likely that this issue will be fixed. You can subsequently update your Intel drivers by locating them on Windows Update.

BUGCODE_NDIS_DRIVER Error – Common Hardware

“Blue screen of death (also known as 0x0000007C)” error refers to a Windows error. stop-BUGCODE_NDIS_DRIVER-error 2

This type of error can occur in different types of Devices manufactured by Asus; it may also be present within some motherboards.

  • ASUS ROG Zenith Extreme Alpha X399 HEDT Gaming Motherboard AMD Threadripper 2 (TR4)
  • X299 Rampage
  • x299 Deluxe II
  • Alpha Zenith Extreme Edition
  • ryzen 9 3900x
  • Asus Prime X299 Deluxe ll
  • Tuf x570 (Wifi)
  • Dominus Extreme motherboard with an Intel W-3175X CPU
  • Gigabyte Aorus B4050I WIFI.
  • ASUS X570-Plus (WiFi) motherboard with BIOS version 1407
  • ROG Rampage VI Extreme Omega X299-II
  • Aspire V5-531


Qualcomm Atheros AR5BWB222 Wireless Network Adapter – A wireless network adapter is a computer hardware device that is installed on an expansion.

BUGCODE NDIS driver windows 10 fix, PCI or mini-PCI slot for the specific purpose of allowing the computer device to connect wirelessly with another device such as a router.

As adding this adapter is not necessary, and in fact can use up some precious PC resources like bandwidth and battery power, you may wish to uninstall this entirely, especially if you do not need or have no use for it at all.

TP-Link adapters are designed to improve or create your internet experience. Their technology helps you bridge the gap between devices that aren’t joined on a network and in some cases of continual problems with these devices.

This prevents access to an adapter’s full functionality. One may remove them from one’s configuration for cleaner operation. BUGCODE_NDIS_DRIVER-error-windows-10 3

Cisco VPN Client – there are certain pieces of software that may interfere with your process of starting up Windows 10. The easiest thing to do would be to uninstall the Cisco VPN client whenever you experience this BSOD code.

In other words, you can either remove the troublesome software or update it and finally get your version upgraded. Alternatively, you could just find another VPN client for your computer.

BSOD Cause: This problem is observed when the operating system that one is trying to boot into is newly upgraded and the bugs caused by the upgrade are not completely eliminated.

As a consequence, your computer might not start. BUGCODE NDIS driver windows 10 fix There are remedial measures in order to fix this error and one can also try other methods in order to fix or troubleshoot BSOD errors such as BUGCODE_NDIS_DRIVER .

Best Solution

You can disable the on-board Wi-Fi adapter during install. This can be done in your computer’s firmware settings commonly called UEFI setup.

You can enter firmware settings during boot up by pressing required keys for your brand or model of PC.

Generally, it can be found in the network adapters configuration. There, you disable the wireless LAN option. After installation of windows 10, immediately update the latest drivers for your Wi-Fi adapter and then enable it again. BUGCODE_NDIS_DRIVER-error-windows-10 3

Fix #1: Install an older ISO of Windows 10

The 1503, 1603, or 1709 versions of Windows 10 may not contain the most up-to-date drivers to ensure stable Wi-Fi in your computer.

As a result, there is some chance that connecting to a Wi-Fi access point may become difficult. On the other hand, the 1803 and 1809 versions may give rise to network problems on your PC.

The best option is installing older drivers on your version of Windows 10.

This error is also found in Windows 10 1809 version. Your Wi-Fi module may be the cause of this error. You can use an updated chip driver for Intel 9260 chip.

Fix #2: Update the motherboard’s firmware

When you encounter a BIOS error it is sometimes because the motherboard has failed to update to the latest version of firmware.

When this occurs it’s possible the operating system simply needs to be rolled back and then disabled so that there are no input errors coming from Wi-Fi or an Ethernet cable.

It’s important however that you not let these technical issues distract from what is more important when running a business:

Making sure you’re offering your clients as many services as possible at all times, whether they be online through social media or through traditional means like advertising in newspapers and radio stations.

There are some steps that you have to follow during first time installation. Disconnect the Wi-Fi router from power source and the internet before installing. Afterwards, then can reconnect it again after installation is complete.

You will find yourself in a never-ending cycle of restarting your computer that begins with installation problems.

It’ll seem as though you get past the initial stages, but this is only if you can avoid the intervening blue screen error messages that are STOPCODE BUGCODE NDIS DRIVER.

Fix #3: Simple Hardware during Installation

Since this BUGCODE_NDIS_DRIVER error can occur during installation, you should keep an eye on the number of devices attached to your computer. You can only allow a keyboard and a mouse to be connected, which means you’ll have to do something about these other devices:

  • Multiple Display Monitors
  • Swap out RAM or DRAM or Memory modules
  • Disconnect external Hard-Drives
  • Keep only the Primary Hard-Drive where Windows 10 will be installed.
  • Disconnect external devices like Network adapters, Wi-Fi extenders etc.
  • Reset BIOS defaults

After the initial installation of your operating system, BUGCODE NDIS driver windows 10 fix you can re-connect all your devices and enable the relevant drivers.

If not done during the initial installation process, one’s operating system requires additional components to be installed in order to achieve proper functionality with USB devices such as a printer or a USB thumb drive for example.

Fix #4: Use Windows approved Flash Drive

It’s true, most of the time, BUGCODE NDIS driver windows 10 fix we have to use DVDs or USB flash drive to install Windows 10.

However, there are instances when there are connection issues that you may come across while trying to create your own bootable installation media or it feels like it’s taking too long to do so.

That’s why the Media Creation Tool that comes on the original Microsoft site helps greatly in these situations because it allows users of all skill levels an easy and simple way to create their bootable installation USB/DVD without having to visit another resource for instructions.

We believe that by using this tool a total novice would be able get past any connection issue effortlessly.

Fix #5: Use a normal SSD

BUGCODE NDIS driver windows 10 fix, there are numerous interfaces to connect an SSD with your motherboard.

Some users have reported difficulty with issues in the M.2 interface of the SSD, but it is not an uncommon interface and usually does not take more than a few more seconds to set up correctly.

Also, the BUGCODE_NDIS_DRIVER error can be due to a hardware configuration issue if an SSD is being used.

Leave a Comment