How to Repair Office 2010 in Windows for Different Kind of Errors?

Repair office 2010 in windows 10, did you know that the in-built “Repair” feature of either Windows 10, 8 or 7 can be used to repair Microsoft Office 2010 like Word, Excel and Outlook?

Thus it may happen that one of the Word files gets deleted by mistake or some system related file is missing from Office folder.

As a result of this, Repair office 2010 in windows 10 Microsoft Office application might not work correctly. The following steps will help you fix a problem very rapidly.

Steps to Fix Office 2010 Not Working Error

1. Go To Control Panel
2. View by Small Items.
3. Double-click on Programs and Features.
4. Select Microsoft Office 2010 that window.
5. Then you will see a Change lable option at the top.
6. Click it.
7. Now several options like “Add or Remove features” etc will be availble.
8. Now select the “Repair” option and click Continue.
9. Office 2010 starts to repair itself automatically.

Clean Boot Solution

Sometimes, Repair office 2010 in windows 10 the repair features required for office update won’t perform their duties properly. One effective option is to boot into “clean boot mode.”

To do this, open the task manager then access the “msconfig” utility in Windows 10 to deactivate startup programs that may be interfering with Office services or processes.

You can also begin your campaign and ask everyone you know to contribute by taking a small moment from their day to help out a worthy cause and donate because there truly is no better way to spend a few minutes than to help those who need it most.

Repair office 2010 in windows 10, this might even have them (and you!) rethinking their own expenses on a few of life’s basic essentials just in time for Thanksgiving.

1. Press the Win + R button and type “msconfig” without quotes.
2. The System Configuration window will open.
3. There you can find the “Diagnostic startup” option under the General tab.
4. This will load only basic devices and services only.
5. Click Apply and restart your PC.
6. Now if Office 2010 applications are working properly, then the problem is with one of the non-Microsoft services.

Aside from the Windows 10 error code 2908, there can be other cases when Office 2010 won’t work in Windows 10. You may have issues with Word, Excel or Outlook crashing or responding sluggishly.

Repair office 2010 in windows 10, the PC might freeze from time to time and you might face a variety of other problems similar these.

The Microsoft Office Setup program is also likely to crash during installment of Windows 10 if you try installing it before completing the upgrade process.

The causes can be many. Some of them are like these

1. Corrupt installation file of Office 2010 software.
2. Registry items of Office 2010 may get corrupted due to a change like uninstall or install.
3. Trojans, malware, virus may have infected your PC and corrupted your Office 2010 files.
4. Another Windows 10 program might have deleted some of the Office 2010 files.
5. Using older version of cleaning utility like C-Cleaner to clean unused registry items might have removed some wanted registry entries.

The solution to error code 2908 is to restore the damaged registry entries associated with it. Repair office 2010 in windows 10 You can do this by opening a command prompt and running the “regedit” program.

These registry entries will be found near the LINEAR GRAPHIC INTERFACE HANDLER ones.

You can also do a full anti-virus scan, device driver update and install, office 2010 updates such as service pack 1 and 2, and clean system junk using the disk cleanup feature in Windows.

In another case, you might be having a few problems with Office 2010 click-to-run application like word. It may crash multiple times when you try to start it and would show the following dialog box.

The first case we mentioned can be even more of an annoyance. Repair office 2010 in windows 10 With this, you’re going to need to go into Control Panel and look for your recently added Office program.

This one may or may not have been in a folder or something, it just all depends on how the company handled its installation during setup.

Repair office 2010 in windows 10, the important thing is figuring out which version it was that you downloaded so proceed accordingly.

How to Repair Office 2010 when you have Error Code 1935.

When you try to re-install Office, due to some reason, Repair office 2010 in windows 10 there may be a chance that some left-over registry entries might hinder the progress of the installation.

Because the back-up files could get corrupted, Repair office 2010 in windows 10 you might find that an error appears during installation.

Nobody likes to encounter a problem like this one – Microsoft Office 2010 still needs some improvements.

Error 1935. An error occurred during the installation of assembly component {89EDD3A9-944B-3257-8484-D6EB6A00DDF5}. HRESULT: 0x800736FD”

To fix this type of error in Office, one should first clean the registry and then restart the computer. After these two steps have been completed, Repair office 2010 in windows 10 try re-installing Office to fix the problem.

When the SFC utility doesn’t identify an issue, the next option is to run a scan of the Windows Registry with a dedicated program that verifies all files are accurate and in place. Even though you might get some errors like this:

Repair office 2010 in windows 10, windows Resource Protection could not start the repair service

The chance at repairing a computer whose registry is corrupt lies in correcting it

HKLM\Software\Microsoft\Windows\CurrentVersion\Component Based Servicing\Version or subfolder in WinSxS.

The following steps may be followed to repair Office 2010.

1. Open the registry and navigate to the following registry entry.

HKLM\Software\Microsoft\Windows\CurrentVersion\Component Based Servicing\Version.

1. Next run the “Readiness Tool“.

(Unfortunately this tool is not available for Windows 10, 8.1, and 8. You can download it for Windows 7 or Vista from the following link. https://www.microsoft.com/en-in/download/details.aspx?id=20858 )

( Note : For Windows 10, 8.1, 8 you can use the Deployment Image Servicing and Management (DISM) tool. Type the following command in elevated command prompt or with Administrator privileges, and then press Enter.)

DISM.exe /Online /Cleanup-image /Restorehealth

DISM creates a log file (%windir%/Logs/CBS/CBS.log) that captures any issues that the tool found or fixed. %windir% is the folder in which Windows is installed. For example, the %windir% folder is C:\Windows.

This tool will create a “CheckSur.log” file in the following location. C:\Windows\Logs\CBS. Then you have to analyze this file for any corruptions in the registry.

1. If that tool doesn’t work, then you have to manually correct the corrupted Version key.
2. First make sure the following key is available in the Windows registry.

HKLM\Software\Microsoft\Windows\CurrentVersion\Component Based Servicing\Version

On the right-hand side you have several registry entries.
One of them refers to the {TrustedInstallerId} which has a value corresponding to your Office 2010 version.

Here are some of the examples.

6.0.6001.18000
6.1.7600.16385

Windows Registry Solution To Repair Office 2010 in Win 10

1. Once you know the {TrustedInstallerId}, using File Explorer navigate the following folder.

C:\Windows\WinSxS

Under this there will be sub-folders like –

x86_microsoft-windows-servicingstack_31bf3856ad364e35_{TrustedInstaller ID} (if you have system 32bit)

amd64_microsoft-windows-servicingstack_31bf3856ad364e35_{TrustedInstaller ID} (if you have system 64bit)

1. Write the name of this folder somewhere or paste it in notepad.
2. Now go to the following key in your Windows registry.

HKLM\Software\Microsoft\Windows\CurrentVersion\Component Based Servicing

1. Take ownership of this key and add your Microsoft user account to have full control.
2. Under this key, create a “Version” subkey.
3. Now create a registry entry on the right-hand side with the following items

Name = {TrustedInstaller ID}
Data = %SystemRoot%\WinSxS\{identified folder in point 5}

1. Now remove your permissions for CBS key and restore ownership back to “NT Service\TrustedInstaller”.
2. Now run the “Readiness Tool”. In the log file created, see if any errors are created.
3. Try to fix those errors and your Office 2010 should start working again in Windows 10.

Conclusion

If Microsoft Office 2010 is not working, there could be more than one potential problem at play. The above issues are a few examples of what you might need to troubleshoot.

Most of the time, the “repair” Repair office 2010 in windows 10 feature in Office 2010 or its equivalent in Windows 10 should quickly identify and cure a malfunctioning copy of the program.

If the repair function seems to be taking too much time or fails to repair the problem, Repair office 2010 in windows 10 however, then there are other things you can try before deciding that your copy of Microsoft Office is damaged beyond repair.