Worked 0xc000000e Solved on Windows 10 – Boot Error is Fixed

Worked 0xc000000e Solved on Windows 10, when your hard disk gets damaged, you might get the 0xc000000e error code and even if it doesn’t then your Windows could be facing a big problem that you would need a third-party software to solve.

If you have multiple hard drives, only one of them is the boot drive.

Boot configuration data is stored on all disks that are related to different devices so that a Windows OS can boot up.

Even though you (insert solution/product here) to fix the boot loading errors, it is important that you change the boot disk order.

Worked 0xc000000e Solved on Windows 10

Make sure that Windows 7 is your first option for both external and internal disks so as not to run into any issues like these in the future because they are often the result of different corruption issues showing up on your system.

Worked 0xc000000e Solved on Windows 10, the typical error message for 0xc000000e will be like this

You’re PC/Device needs to be repaired…….
File: \Windows\system32\winload.efi
Error Code: 0xc000000e

This can happen when the Windows 10 Operating System is deleted from one hard drive and has been moved to another hard drive as a boot drive. The options for booting up may have also changed. 1 pic

For example, having two disks like a Samsung 850 Evo 1 TB and a Samsung SM951 m.2 NVME 128 GB, can complicate the issues.

At boot time, you may be confused about what is happening. If a hardware failure in your hard drive causes error messages and blue screen errors consistently for example.

Or if some software freezes, you may get frustrated assuming that these issues have something to do with your hard disk or operating system like Windows for example.

There are different causes which can cause this Windows 10 error code issue.

  1. A required device isn’t connected or cannot be accessed
  2. Required device is inaccessible
  3. The selected entry could not be loaded
  4. The selected entry could not be loaded because the application is missing or corrupt
  5. The boot selection failed because a required device is inaccessible.

Source :

As you can see above, Worked 0xc000000e Solved on Windows 10 the real cause for this error code 0xc000000e is either the winload.exe file was damaged or not installed correctly or the bootloader’s location of Windows 10 is missing, deleted or corrupt.

How to Fix Error Code 0xc000000e in Windows 10

The following solutions may be tried to fix this problem.

  1. Change the boot order of the disk, if you have multiple disks like HDD and SSD.
  2. Use Windows 10 Startup Repair feature using Installation Disk
  3. Apply BCD command to rebuild it manually
  4. Make your Disk Online
  5. Try third-party software

Most of the time, Worked 0xc000000e Solved on Windows 10 the above fixes will show you the way to resolve error code 0xc000000e in Windows 10.

Change the Boot Order in BIOS

The first preliminary fix is to check, whether your computer’s hard disk is the first disk loading during booting.

You may want to check if the BIOS tables can be changed, if you think anything needs to be changed, such as your username.

You may want to check if the BIOS tables can be changed, Worked 0xc000000e Solved on Windows 10 if you think anything needs to be changed, such as your username.

Worked 0xc000000e Solved on Windows 10, most of the times, pressing F2 or F2 or F10 or ESC or DEL keys will allow you to access BIOS settings.

This depends on what kind of computer you are using and the BIOS software in your computer. 2 pic

This is one example of how user friendly Phoenix Award-BIOS CMOS setup utility is: Unlike many competitive BIOS devices, in “Advanced BIOS features” of Phoenix Award-BIOS CMOS setup utility, you will find options rather than the standard text.

  1. Hard Disk Boot Priority
  2. First Boot Device

You can have multiple devices connected to your PC such as USB, SD cards and hard drives.

  1. First make sure your HDD is the First Boot Device.
  2. If you have multiple hard disks or solid state drives on the same system, then you have to use Hard Disk Boot Priority.
  3. Go to the first option and press Enter. Then select the disk which is your boot disk and press F10.

It will save your changes and restart the computer. Worked 0xc000000e Solved on Windows 10 If nothing is corrupt, you should be able to fix error code 0xc000000e and reenter Windows.

Use Startup Repair in Windows 10 Installation Disk

Create bootable installation media for Windows 10, which can be either a DVD or USB. For instructions on how to create installation disks, Worked 0xc000000e Solved on Windows 10 we recommend using an utility called Rufus.

Alternatively, you could use tools such as Magic-ISO to make a bootable ISO image on a USB drive instead.

Insert the appropriate hardware and change the BOOT options in order to load from it.

Source :

The installation disc will boot up, and you will select a language. Click Next. You’ll be taken to the next screen. On this screen, at the top left of the window, you should see an option to repair your computer. 3 pic

Then click “Troubleshoot” > “Advanced Options” > Startup Repair. 4 pic

If you want to keep your computer running at optimum speeds, Worked 0xc000000e Solved on Windows 10 it’s always a good idea to delete temp files to free up some space and clear out the clutter that can build from everyday use.

Rebuild BCD manually

This solution is meant to resolve the issue of a corrupt or bad bootloader. If the boot configuration is corrupted due to some hardware change, then this error will resolve it.

This is the most common solution for error code 0xc000000e and in many instances problem are solved when this solution is implemented.

  1. Boot using the Windows 10 Installation dsic.
  2. Then go to “Advanced options”.
  3. But this time select “Command Prompt”.
  4. Enter the following commands one by one.

bootrec /fixboot

The bootrec /scanos

bootrec /fixmbr

The bootrec /rebuildb


If you receive any other error message than a “Successful” response, try using these troubleshooting steps.

Access is denied while apply the fixboot command. 5 pic

In order to do this, you need to open and run the Command Prompt program on your PC.

Step 1: Type diskpart and press Enter key.

Step 2. Type list disk and press Enter. Now check disk number to identify boot disk, this is usually Disk 0. if not, use the correct boot disk number.

Step 3. Type select disk 0 (or your boot disk number) and press Enter.

Step 4. Type list volume and press Enter. Now look for the volume number of EFI partition.

Step 5. Type select volume 1 and press Enter. (Change volume to your number)

Step 6. Type assign letter=V: and press Enter. V: can be replaced by any drive letter that is not in use by any partition.

Step 7. Type exit and press Enter.

Step 8. Now type V: (or the drive letter you just assigned) and hit Enter.

Step 9. Type md \efi\microsoft\boot\ and hit Enter.

Step 10. Type — /d V:\efi\microsoft\boot\ and hit Enter.

Step 11. Now type bootrec /fixboot command, the problem should be solved now.

Step 12. b–boot c:\windows /l en-us /s V: /f all

If you have multiple OS on the same PC, then you can add them to the boot configuration. Choose an operating system when prompted during startup with this command: /scanos

If the computer still fails to boot after ejecting all prior discs, Worked 0xc000000e Solved on Windows 10 then you should try the disc in your computer’s optical drive first before trying any other disc.

Have you ever tried to boot up without a BIOS or load different programs than usual but got interrupted by an error message? Well, today we are going to tell you how you can solve this problem by accessing your computer’s BIOS settings.

The most common reason is that you’ve installed multiple disks as your source.

Make the Boot Disk Online and Scan Disks

Sometimes, the BIOS setting gets changed and needs to be reset which may result in your boot drive going offline. You’ll need to use these commands to keep it going:

In the Command Prompt of your installation disc, as we told you in our previous tutorial, you must enter these commands.

  1. diskpart
  2. list disk
  3. list volume
  4. select disk # (or) select volume #
  5. online disk # (or) online volume #

Here hit Enter and restart the computer.

Use Easy-BCD kind of repair software

There are several third-party software that helps you to recover corrupted boot loader. They can also scan your hard disk or any other media on which they run and do other functions, Worked 0xc000000e Solved on Windows 10 such as formatting or system update etc.

Just make the disc bootable using an USB or DVD and then insert it in the computer and press enter so that it boots up in live mode. 6 pic

When your computer is loading your preferred operating system it gives you a list of symbols representing each drive and normally the one you would like to boot from will have an asterisk next to it.

Worked 0xc000000e Solved on Windows 10, you’ll have to find the way to make this drive start loading by holding down on a different key.

  1. Easy Recovery Essentials
  2. AOMEI Partition Assistant
  3. Easy-BCD

Some of the case-studies of the above error code can be like this.

I just upgraded to Windows 10 on my laptop. Windows 7 was running perfectly. To start with my setup seemed fine but after a while I started experiencing problems with the boot process.

Your PC need to be repaired
File: \Windows\system32\winload.exe
Error Code: 0xc000000e
You’ll need to use the recovery tools on your installation media, etc……
Press Enter to try again
Press F8 for Start-Up Settings”

Worked 0xc000000e Solved on Windows 10, I updated my Windows 10 OS few days back due to the mandatory prompts to update.

I accidentally plugged in my smartphone to a faulty adapter which caused my smartphone to short circuit. After that, I couldn’t start my PC anymore and got the Windows error code 0x00000086.

Tried many options like below :

the bootrec /fixmbr
bootrec /fixboot –> Got Access is denied at this step
– bootrec /rebuildb– –> Total identified Windows installations: 0

Your 2 TB SATA hard drive is not being recognized. Do you have any ideas about how to repair and recover the data on your 2 TB hard drive?


As you can see, the main cause of this error 0xc000000e occurs when we install and load the winload.exe on each operating system, and fix the boot configuration data.

Worked 0xc000000e Solved on Windows 10, once that’s done, load up the correct boot hard drive and everything should be back to normal.

Sometimes you have to try 2 or even 3 different types of solutions mentioned above to solve your problem. However, you can use any of the software told above to repair your startup problems caused by this error code.

Applying the commands in a Command Prompt properly is also important.

If you are able to rebuild the MBR using bootrec commands, this error code will disappear. However, there may be times when certain error codes occur despite performing the corresponding troubleshooting steps.

For example, if you receive an access is denied error message that prevents Recovery Console from loading, then you may have exceeded either the drive partition size limit or the sector shift limit with your hard disk partitions.

Worked 0xc000000e Solved on Windows 10, if your error has been fixed, let us know and mention that you have experienced a difference in the feature.

Leave a Comment